Powerwerks PW150TFXBT
PW150TFXBT
Bluetooth Enabled
? Equipped with Eminence® Speakers
? 150 Watts with Built-in 3 Channel Mixer
? 4 Built-in Effects
? Monitor Out and Subwoofer Out
? POWERLINK for Ease of Input Expansion
The PW150TFXBT Bluetooth P.A. System combines quality performance and convenient features, all in a highly portable package. You’ll find that the PW150TFXBT works well in a variety of environments, amplifying vocals, instruments, keyboards, drum machines, audio devices, and more.
The four 4.5" speakers and high-frequency driver provide just the right combination of high and midrange sounds. This balance ensures your vocals cut through the mix while minimizing harsh and unwanted frequencies.
The PW150TFXBT construction is based on the same tried-and-true techniques as the rest of our speaker line. This includes a heavy-duty steel grill and rigid corners. This model also utilizes a high-frequency driver for crisp, accurate reproduction of treble frequency and articulate speech. For the soloist or acoustic duo, the PW150TFXBT works well when positioned on a standard speaker stand.
The PW150TFXBT is the first Powerwerks Tower to feature a dedicated Monitor Out as well as a seperate Subwoofer output. The PW150TFXBT allow features 4 built-in effects: Room Reverb, Hall Reverb, Chorus+Reverb, and Delay+Reverb.
The POWERLINK Circuit allows two or more units to be linked together and function as one P.A. system. As your following grows, so does your sound system. Multiple units can be connected to increase the sound coverage in your venue of choice.
With the PW150TFXBT's built-in Bluetooth capability, you can easily connect any bluetooth-enabled device to the PW150TFXBT to stream audio wirelessly!
Product Specifications
Output Power 1%
|
2 x 75W, 2 x 4 ohm load
|
Accepted Inputs
|
Ch1 and Ch2, Mic XLR Balanced, Line Level 1/4" Un-balanced
|
Ch3, 1/8" Line Level or Bluetooth Device (150TFBT models)
|
|
Frequency Response
|
20Hz-20kHz, Actual response is tailored to speaker cabinet for accurate acoustical response
|
Hum & Noise
|
-46dB, ResidualNoise, all level controls 0% (minimum)
|
-37dB, Nominal System Noise, all level controls at 50%
|
|
System Gain/Speaker Output (Measurement at 1kHz)
|
+49dB, Mic to Speaker Output (Ch1 & Ch2)
|
+35dB, Line to Speaker Output (Ch1 & Ch2)
|
|
+25dB, Aux In to Speaker Output
|
|
Channel EQ (high, low)
|
4kHz and above, 800Hz and below
|
POWERLINK (IN and OUT)
|
Both jacks accept a balanced input and sends a pre-master volume output mix of channels
|
Recommended use: Linking two PW150's or adding a PW4EX mixer
|
|
Subwoofer Out
|
Line Out, 20Hz-150Hz
|
Monitor Out
|
Line Out, Balanced TRS Output with grounded sleeve
|
Phantom Power
|
+15V, Mic inputs (Ch1 & Ch2)
|
Speakers
|
Four 4 1/2", 50W 8 ohm each
|
Horn
|
3 1/2" Piezo Driver
|
Power Capacity
|
150W RMS
|
Frequency Response
|
60Hz-20kHz, Full Range (subwoofer jack not used)
|
150Hz-20kHz, Crossover Active (1/4" mono plug in subwoofer jack)
|
|
Nominal Impedance
|
4 Ohm x 2, Not designed for external speakers
|
Bluetooth Module Features
|
Bluetooth 3.0EDR compliant. Typical +2dBm Class 2 output power. Audio DAC:94dB SNR. A2DP profile support
|
Dimensions mm (W,H,D)
|
190mm, 715mm, 165mm
|
Dimensions inches (W,H,D)
|
7.5", 28", 6.5"
|
Dimensions kg
|
11.3 kg
|